Charging-Dock for UE BOOM V.2
Charging-Dock for UE BOOM V.2
3D
Published 2018-06-07T16:32:09+00:00
I desinged V1 of this dock in order to have a home for my UE BOOM 2 speaker in my room. It fits the original charging cable which came with your speaker. I desinged it to be clean on the outside, but to fit you speakers form perfektly from inside. Simply drop you speaker in for a charge! First Gen had some issues with an uneven bottom surface, fixed it with this one.
This dock should fit for UE-Boom first and second Gen. If you wish a dock for the big one let me know!
1. Print the two parts "top" and "bot" (Top part needs some support)
2. Clean up the parts till they fit seamlessly
3. Feed your cable through the hole of th top part and connect it to the speaker.
4. Place the speaker in the dock. (You will have to remove the screw and the rubberpart from the box)
5. Add the bottom part and make shure to give the cable a tight fit.
6. Scew on the bottom peace with two M4*12 zylindrik bolts.
7. You might want to add some rubber feet or glue it to a surface with some hotglue or doublesided tape.
| Date published | 07/06/2018 |
| Dimensions | 8cm x 8cm x 6cm |
| Technology | FDM |
| Complexity | Easy |