I thought that when brought into three dimensions the Clash of Clans shield would make an interesting keyholder.
Using the arrows fired into the shield as hooks to throw your keys over.
I designed the keyholder in Solidworks basing the main shield on a picture of the clash of clans logo found in a google image search. The arrows were made to match the logo as closely as possible, then re-sized to allow a keyring to fit over them.
I judged the angle to fit the arrows into the shield as a mix between what looked right on the logo and what would allow the shield to be printed off support free.
I added two screw hooks to the back of the shield so that it could be slotted onto the wall and held in place by two screws.
The shield was printed in PLA using a 0.2mm layer resolution.
If you purchase this object through the MyMiniFactory Store please note:
This product will come unassembled and unpainted when you buy it. We encourage you to be creative, personalize it as you wish. Express your awesomeness and share a picture of the final result with us!
Unless you have a particular request, the colour of your print will be chosen at random and will be printed in either ABS or PLA filament.
Delivery time will be between 1 and 4 weeks from the moment you order the object. This is dependent on your location and the length of time the object takes to print.
Email firstname.lastname@example.org if you would like any further information or if you have any special requests.
Sometimes orders will be printed live on MyMiniFactory TV - check it out here.