Death Wish Spirit
$2.95 Death Wish Spirit
3D
Published 2023-08-07T19:46:23+00:00
44
0
Add to Collection
Printing Details
A few things to consider before printing!
- A clean leveled bed is a must!
- If slicing in Cura it is best printed in the orientation that its in with the z seam set to back left. this way the z seam will avoid overhangs!
- Can be scaled! tested from 60% to 140%. at 60% the ball joints on the wings can be sticky and will need to be worked loose gently!
- There are clips on the side of the body for the wings to rest on. If you feel resistance while pushing past the clips press the wing into the body while pushing past it as to not apply pressure to the clip
- The wings can be kept straight or bent using a heat source
Technical Information
Date published | 07/08/2023 |
Price | $2.95 |
Support Free | YES |
More Information
Object Parts
60% in Eryone Blue, Purple, and Black tricolor