Detailed AT-AT from Star Wars Single Foot
Detailed AT-AT from Star Wars Single Foot
3D
Published 2019-07-02T05:25:12+00:00
So I ran into a problem trying to print the feet for this model.
On the Creality 3D® Ender-3 it's too big to fit on the bed so I tried to print it by turning it around to fit it on corner to corner on the bed but when it came to printing the arms for the arch as it was at an angle the filament didn't stay on the support. Tried to increase the density and that didn't work.
So I've remixed just a single foot that prints perfect when not at an angle, you can add the rest of the feet to do all at once but I found one at a time still works.
Printed at 10% Fill Density
Support Type - Everywhere
Temp - 200 - Bed 60
Cleaned the bed with 99.9 Isopropyl so no need for brim or raft.
| Date published | 02/07/2019 |
| Time to do | 515 - minutes |
| Material Quantity | 28 |
| Dimensions | 70.2 70.2 58.2 |
