Guitar Smartphone Lectern By Camero
Guitar Smartphone Lectern By Camero
Published 2016-08-03T09:21:56+00:00
Hello, i am Leonardo Camero from Colombia.
This piece bears the weight of the smartphone and if printed with the flat side down (without using support material) and good material can withstand even a tablet.
I have used for a large and thin smartphone like the Galaxy A5 and the oldest as the Samsung 550 with good results.
Recommend download, verify the size of the suction cups, as used are those normally found in Colombia.
I hope you can help me continue this project, voting for my figure.
The suction cup and stick used are as follows:
http://www.aula-3.com/admin/uploads/productes/265/img1/PalosPinxo.jpg
https://www.wincraftschool.com/_asset/859zxv/SuctionCup.jpg
Printed using Fiber Force filament.
support
Date published | 03/08/2016 |
Time to do | 90 - 200 minutes |
Material Quantity | 20g |
Dimensions | 76×51×81 |
Technology | FDM |