Monster High Blank Head - Support Free V1
Monster High Blank Head - Support Free V1
Published 2015-08-24T11:14:30+00:00
Part 1 of 2 of the initital pieces from our MyMiniFactory Monster High Hack project*. Check out the parts created so far.
The zip files contains 2 versions of the head, one with a T joint in the top, and one without.
Uses for this head -
1. Download, 3DPrint and decorate however you want, e.g with sculpey clay, artists acyrlics etc
2.Download the STL, import into your favourite design software (e.g zbrush), cusomise and then print!
How?
These head base mesh's were generated using a David 3D scanner at the Imakr store London. The joints were re-created using Solidworks Software. The mesh's were cleaned in Zbrush, and the joints from Solidworks also imported into Zbrush to be merged into the cleaned up scans.
*This is a stage 1 file, so not 100% perfect, it fits nicely onto Monster High doll, but still a few problems when using with the Monster High Monster Maker...stay tuned for updates, or if you wish to also contribute to this project please maker contact.
Print at 0.10mm laye height, support off, 20% infill. This takes 3 hours and uses 20g of filament.
Date published | 24/08/2015 |
Time to do | 180 - 200 minutes |
Material Quantity | 20g |
Dimensions | 43 x 52 x 45.5 mm |
Complexity | Easy |
Support Free | YES |