Owl Climbing Hold
Owl Climbing Hold
3D
Published 2014-10-17T12:52:40+00:00
Personalise your climbing wall with this Owl themed climbing hold, this hold can not only provide new challenges and help improve your climbing skills but also create exciting environments when climbing. Unleash your creativity and add a lick of paint to the wall to fully create the illusion of climbing higher into the trees whilst meeting this uplifting owl along the way!
Scale him up or down to really personalise your wall and create your own challenges in the world of climbing. Don't climb? No problem, he makes a rather cute decoration is you just want to hand him on your wall.
Please note! This product must be printed with 75% Infill or more if being used for a climbing wall. Test the product at a low height before moving up as printer qualities tend to vary. For best results, print in Carbon Fiber based filament.
Printed using single extrusion PLA. 0.2mm Later Height. 75% Infill. This uses about 115g of filament and takes around 8 hours to print. Please note: You will need t bolts to fix to a wall (unless using for decoration) Remember to test a low height first as printer qualities tend to vary.
| Date published | 17/10/2014 |
| Time to do | 400 - 480 minutes |
| Material Quantity | 115g |
| Dimensions | 100 x 90 x 40 |
| Complexity | Very Easy |
