Phone mounting system - Version 1 (old) - From Vinovation
Phone mounting system - Version 1 (old) - From Vinovation
3D
Published 2019-05-15T13:40:11+00:00
Hi,
Thanks for visiting.
(NOTE: THIS IS AN OLD VERSION OF THIS PRODUCT, PLEASE GO TO PHONE MOUNTING SYSTEM - VERSION 2)
This design is a mounting system for Phone.
It can work with a variety of phone sizes. Let me know on the comment if your phone could not fix in here, I will look into redesigning the holding mechanism.
The objectives of this project are to design a solid holding mechanism for phone and it can also be fitted inside a bag without taking too much space during travel.
This is still a very early design, so will need your valuable feedbacks for further developments.
Please refer to the assembly drawing attached for required parts and screws. You will also need two more rubber bands for this.
Next steps are:
- to integrate suction cups on the legs so it can be mount onto the mirror or smooth surfaces.
- to design with more folding joints
- to design with a table clamping mechanism
- to design a holding mechanism so it can be mounted on a bicycle and motorbike
- to design to work with GoPro and other cameras
| Date published | 15/05/2019 |