Star Wars Vibro-Arbir Blades
Star Wars Vibro-Arbir Blades
3D
Published 2018-03-22T18:48:57+00:00
The Vibro-Arbir blades from one of the Preatorian guard in The Last Jedi.
Fits together to make a dual version!
All 3D printed with the exeption for some nails used as pegs for stability.
Strong enough to swing it around like and feel awesome.
Probably not strong enough to actually hit stuff and have it survive.
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.1-0.2
Infill:
20%
Notes:
Most parts will print without any support and it is best that you print without support unless you don't mind getting the support out the nail holes.
Do not skimp out on the infill as the nail holes wont the needed support ( I would go with at least 18%).
Do no print too many walls on the blade parts to prevent the walls around the nail holes to be printed.
| Date published | 22/03/2018 |
| Time to do | 1800 - minutes |
| Material Quantity | 600 |
| Dimensions | 1800x100x40 |
| Technology | FDM |
| Complexity | Easy |
Printed via a SLA printer. Printed out superb