ThunderCats Logo
ThunderCats Logo
Published 2017-09-04T11:40:12+00:00
I have wanted one of these, since I was six or seven years old, and it occured to me today, that I can make my own!
After some google-ing, I couldn't find one, that was just the basic emblem, without some feature, like a hole in it, or a ring on top, or printed in multiple pieces to snap together, so I designed my own.
It is one piece, with the black portion on top of the red, so you can switch colors by layer, rather than two different prints.
This one, is 60mm in diameter, and 3.5mm thick. Scale up or down to desired size. I changed from red to black filament, at the end of layer height 2.15mm, printing at 0.15mm/layer.
Nothing fancy, just the fulfilment of a simple childhood desire.
Enjoy!
I printed mine, with a layer height of 0.15mm, and switched from red to black filament, at the end of the layer height 2.15.
No supports needed.
Date published | 04/09/2017 |
Time to do | 60 - minutes |
Material Quantity | 8.7g |
Dimensions | 60mm x 3.5mm |
Technology | FDM |
Complexity | Very Easy |
Support Free | YES |
Scaled it up slightly, printed in one colour but will paint. Quick and easy print to get me back into printing.