upcycled can fountain
upcycled can fountain
Published 2018-02-21T09:48:54+00:00
the object is a bracket to hold an empty soda can. the user punches a hole in the side of the can near the bottom then inserts the can into the bracket. the bracket can then be mounted on a board at either a flat angle or upright. using a bucket or other container an aquarium pump is used w/ plastic tubing to carry water up to the top piece. then the water either goes in the side hole & out the end opening, these can then waterfall into more cans/brackets. water can also go into the end opening and out the side hole. the final piece needs to drain back into the bucket/container. brackets also have screw/nail holes on the bottom/side for mounting to the board.
Layer Thickness 200 microns. InFill 20%.
Date published | 21/02/2018 |
Time to do | 410 - 430 minutes |
Material Quantity | 68 grams |
Dimensions | 127mm x 60mm x 70mm |
Technology | FDM |
Complexity | Easy |