fishgee's Print of Straight Pole + Curved Hole Illusion
Community Print 3D Print of Straight Pole + Curved Hole Illusion
Published 2018-06-06T12:25:07+00:00
7
0
Printed on: Printrbot Metal Plus
Material: PLA
Description
Great illusion and a relatively easy print. I printed the pole vertically with a 20 line brim. The body was printed at .3mm layer height, the rest at .2mm. I had to file the gear, the arm, and the hole a bit to get them seated properly. The only glue I used was to keep the pole in place. I found the best way for me to line up the pole was to center it in the hole as shown in the picture. I used some putty to keep it immobile while the epoxy set up.