Airsoft- AR-57 Dual P90 Magazine feeding system
Airsoft- AR-57 Dual P90 Magazine feeding system
3D
Published 2018-08-15T16:31:42+00:00
Entry for the airsoft design competition please help out by giving this a like!
This is a dual mag adaptor for an AIRSOFT AR-57, because whats better than an M4 that uses p90 mags?
AN M4 THAT USES TWO!
Turn your AR-57 in to a sudo LMG with this adaptor enabling the use of two mags!
Mags are held in place and due to the unique design only 2x M5 bolts are needed to secure the item in place on the picatiny rails.
Mags do NOT feed at the same time the dial enables you to switch feeding from one mag to the outher so you can have plenty of ammo or just use two types of ammo, the possibilities are numerous.
Just like normal mag changes if you wait untill you are completly dry in one mag before turning over to the seccond mag you first shot after will of course not shoot anything.
These feed perfectly with no issues, fps is consistant however i did notice aprox a 10fps drop from useing a mag normaly.
Upgrade your AR-57 today with a kit that makes it stand out even more than normal!
*update:- added some pictures taken while i was at a local game!
Each part needs printing differently, i have tried to align them correctly in the model, most can be printed without supports, the main mag holder print with supports touching bed as the small sticky out nubs next to the hole need to be ok since the push the spring back on the p90 mags so they will feed.
i printed them at 100 speed 0.2 layers
| Date de publication | 15/08/2018 |
| Durée d’impression | 15 - minutes |