AECATA06 - The Tomb of Anaq'Su
$9.00 AECATA06 - The Tomb of Anaq'Su
Published 2023-01-30T12:45:01+00:00
It is fair to say that we cut our teeth on catacombs at Aether Studios. Before even conjuring the idea of our own studio, Colin and Will, were besieged with requests for damned locations on the old FDG Forum. We've given every measure of attention to these catacombs with work from every one of our Artists.
This set contains the work of Nasos Maloudis. After looking over our catalog, Nasos and Will came to the conclusion that we needed more mummies. This set seeks to remedy that deficency. Nasos sculpted up miniatures and terrain for this set, while Will provided the tile remixing. We hope the results will find a welcome place on your table.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
Date published | 30/01/2023 |
Price | $9.00 |
Supporto Gratuito | YES |
Printed and painted by Windy Trusty