Capsule Box w/ Hinge
Capsule Box w/ Hinge
Published 2017-07-10T11:08:19+00:00
Inspired by Diresta's Leather Compact Case https://youtu.be/ALCDfylRrEM
The hinge requires a pin to be inserted into the hole. The hole's inner diameter is 3 [mm] but a large paperclip should suffice.
It is recommended to print this with exterior support and ~15% infill
The capsule is made out of 2 identical parts, so print "cover1.stl" twice.
In order to assemble the hinge mechanism insert a 3 [mm] pin into the holes in both parts. You might Want to bend the ends of the pin in order to secure it in place (see pictures of reference).
If you don't have access to a 3 [mm] metal rod, a large paperclip should be adequate.
Light sanding and maybe some drilling may be required in order to fin the parts together.
For any additional help comment below :D
Date published | 10/07/2017 |
Tecnologia | FDM |
Complessità | Easy |