Effects parts / Mobile Suit / Robot/ Figure
Effects parts / Mobile Suit / Robot/ Figure
3D
Published 2023-02-21T16:33:39+00:00
Please enjoy combining them as effect parts for plastic models of robots and figures.
Please refer to the video for how to use each part.
Reference videos:
https://youtu.be/hCNLEEaMGmM?t=218
In the example, it is used as a Gambit effect for BANDAI HG GUNDAM AERIAL.
The effect parts in the example are 3D printed with PC filament, painted with fluorescent paint, and illuminated with UV light.
The hole diameter of each part is the standard 3mm diameter even for display bases.
Please enjoy combining with plastic models of robots and figures.
The stl data of "effects-1" depends on the material, but please use it by bending it freely.
-------------------------------------------------
Reference for print settings
Slicer Cura
Nozzle diameter 0.4mm
Recommended layer height 0.2mm
All parts No support
*supplement
If the parts interfere with each other, scrape them off with sandpaper.
If the parts are loose, apply tape to adjust the thickness.
| Date published | 21/02/2023 |
