M32 MGL Grenade launcher prop
M32 MGL Grenade launcher prop
Published 2018-04-09T09:49:10+00:00
So this model was made by me. This is my second model. What I did was work out the cylinder barrel size and roughly designed the rest of this prop relative to that size. Some sizes will be off, I did modify the look of it a bit. It is ready to have 40 mm dummy grenades fit into it. It is intended to have moving parts.
The grip and picatinny I took off thingiverse just to show an example. Those models are not included in this print.
You will need a spring to put under the topclip (lever)
You will need a bolt and bearing to hold the barrel cylinder.
Some parts need gluing together.
You will need bolts to or pins to secure the hinge system.
I didn't orientate the parts as some of you may like to print the parts in different orientation.
https://www.youtube.com/channel/UCnUgkBmiQfixJcNUzDw5YWA
https://www.facebook.com/AandPcreative/
Printed at 50% for testing purposes with a few parts rotated to better adhere to bed I mananaged to fit everything into a 220x220 space without much issue. The barrel needs about -3% scaling vs the rest to fit into the hole properly.
Date published | 09/04/2018 |
Tempo per farlo | 480 - 600 Minuti |
Quantità di filamento | 188g |
Dimensioni | 220x220 |
Tecnologia | FDM |
Complessità | Easy |