JetPrints's Print of Stormwind Lion Statue
Community Print 3D Print of Stormwind Lion Statue
Published 2018-05-12T01:26:31+00:00
0
0
Printed on: Raise3D N2
Material: PLA
Description
We printed one at 100% scale, took about 5.5 hours. Then we printed the second at 158% scale, took almost 13 hours.
Settings were
Layer height 0.2mm
Nozzle 210 degrees
Bed 62 degrees (hairspray on glass)
Speed was 50mm/sec
retraction was 1mm at 40mm/sec
OUTSTANDING model :)